Renting, living in a dorm, or just don't want holes in your wall? A lightweight statement mirror can go up in minutes with adhesive strips. Here's how to do it right so it stays up.
1. Check that your mirror is the right kind
Adhesive strips work best with lightweight mirrors. Heavy glass mirrors usually need screws and anchors. Eric Frags mirrors use a layered, shatter-resistant build instead of glass, which keeps them light enough to hang with the adhesive strips that come in the box.
2. Pick the right wall
Strips hold best on smooth, painted drywall, tile or finished wood. Avoid textured walls, wallpaper, brick and freshly painted walls (wait at least 7 days after painting). Keep mirrors away from steamy spots like right above a shower, since moisture weakens the adhesive.
3. Clean the spot
Wipe the wall with rubbing alcohol and let it dry completely. Dust and oils are the number one reason strips fail. Don't use household cleaners; they can leave a film behind.
4. Plan the placement
Hold the mirror up and mark the top corners lightly with painter's tape. For a statement piece above a bed or desk, center it and leave about 8 to 12 inches of space above the furniture.
5. Apply the strips and press
Attach the strips to the back of the mirror, spread out evenly near the edges. Line it up with your marks and press firmly over each strip for about 30 seconds.
6. Let it set
If your strips say to wait before loading them fully, follow that. Then step back and enjoy.
Removing it later
Most adhesive strips have a pull tab. Pull it slowly straight down along the wall, not outward, to remove it cleanly without damaging paint.
Looking for a statement piece? Shop Eric Frags artist-inspired mirrors, hand-assembled in Los Angeles and shipped with adhesive strips included.